Dell PowerConnect 8024 - Sntp Trusted-Key; Sntp Unicast Client Enable

Clock Commands 919
console(config)# sntp server 192.1.1.1
sntp trusted-key
Use the sntp trusted-key command in Global Configuration mode to authenticate the identity
of a system to which Simple Network Time Protocol (SNTP) will synchronize. To disable
authentication of the identity of the system, use the no form of this command.
Syntax
sntp trusted-key key-number
no sntp trusted-key
key-number
• key-number — Key number of authentication key to be trusted. (Range: 1–4294967295)
Default Configuration
No keys are trusted.
Command Mode
Global Configuration mode
User Guidelines
This command is relevant for both received Unicast and Broadcast.
Example
The following defines SNTP trusted-key.
console(config)# sntp authentication-key 8 md5 ClkKey
console(config)# sntp trusted-key 8
console(config)# sntp authenticate
sntp unicast client enable
Use the sntp unicast client enable command in Global Configuration mode to enable a client
to use Simple Network Time Protocol (SNTP) predefined Unicast clients. To disable an SNTP
Unicast client, use the no form of this command.
Syntax
sntp unicast client enable
no sntp unicast client enable