Dell PowerConnect 8024 - Show Ip Ospf Virtual-Link Brief

OSPF Commands 779
Hello Interval................................. 10
Dead Interval.................................. 655555
Iftransit Delay Interval....................... 1
Retransmit Interval............................ 5
State.......................................... down
Metric......................................... 0
Neighbor State................................. down
Authentication Type............................ MD5
Authentication Key............................. "test123"
Authentication Key ID.......................... 100
show ip ospf virtual-link brief
Use the show ip ospf virtual-link brief command in Privileged EXEC mode to display the OSPF
Virtual Interface information for all areas in the system.
Syntax
show ip ospf virtual-link brief
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode.
User Guidelines
This command has no user guidelines.