Dell PowerConnect 8024 - Debug Dot1 X; Debug Igmpsnooping

994 Serviceability Tracing Packet Commands
Command Mode
Privileged EXEC mode.
User Guidelines
There are no usage guidelines for this command.
Example
console#debug console
debug dot1x
Use the debug dot1x command to enable dot1x packet tracing. Use the “no” form of this
command to disable dot1x packet tracing.
Syntax
debug dot1x packet [ receive | transmit ]
no debug dot1x packet [ receive | transmit ]
Default Configuration
Display of dot1x traces is disabled by default.
Command Mode
Privileged EXEC mode.
User Guidelines
There are no usage guidelines for this command.
Example
console#debug dot1x packet
debug igmpsnooping
Use the debug igmpsnooping to enable tracing of IGMP Snooping packets transmitted and/or
received by the switch. IGMP Snooping should be enabled on the device and the interface in
order to monitor packets for a particular interface.
Syntax
debug igmpsnooping packet [ receive | transmit ]
no debug igmpsnooping packet [ receive | transmit ]