Dell PowerConnect 8024 Cli Reference Guide

RADIUS Commands 433
28
RADIUS Commands
This chapter explains the following commands:
• aaa accounting network default start-stop group radius
• acct-port
•auth-port
•deadtime
•key
•msgauth
•name
• primary
•priority
• radius-server deadtime
• radius-server host
•radius-server key
• radius-server retransmit
• radius-server source-ip
•radius-server timeout
•retransmit
• show radius-servers
• show radius-servers statistics
•source-ip
•timeout
•usage
aaa accounting network default start-stop group radius
Use the aaa accounting network default start-stop group radius command to enable RADIUS
accounting on the switch. Use the “no” form of this command to disable RADIUS accounting.

Dell PowerConnect 8024 Specifications

General

Switching Capacity	480 Gbps
Stackable	Yes
Device Type	Switch
Enclosure Type	Rack-mountable
Power Redundancy	Optional
Width	17.3 in
Height	1.7 in
Jumbo Frame Support	Yes
Ports	24 x 10 Gigabit SFP+
Management	Web-based GUI, Command Line Interface (CLI), SNMP
VLAN Support	Yes
Power Supply	Internal
Routing Protocol	Static routing
Features	Quality of Service (QoS), VLAN support
Compliant Standards	IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3z
Operating Temperature	0 to 45 °C
Storage Temperature	-20 to 70 °C
Relative Humidity	10% to 90% (non-condensing)
MAC Address Table Size	32, 000 entries