Dell PowerConnect 8024 - Show Tech-Support

System Management Commands 1097
---- ----------- ----------- ------
1 Sensor1 42 Fail
1 Sensor2 xx Medium
1 Sensor3 xx High
1 Sensor4 xx Low
Fan Status:
Unit Description Status
---- ----------- ------
1 FAN1 Fail
1 FAN2 Medium
1 FAN3 High
show tech-support
Use the show tech-support command to display system and configuration information for use in
debugging or contacting technical support. The output of the show tech-support command
combines the output of the following commands:
•show version
• show sysinfo
•show port all
• show isdp neighbors
• show logging
•show event log
• show logging buffered
• show running config
• show debugging
Syntax
show tech-support
Parameter Ranges
Not applicable