Dell PowerConnect 8024 Cli Reference Guide

Line Commands 955
• number-of-commands — Specifies the number of commands the system may record in its
command history buffer. (Range: 0-216)
Default Configuration
The default command history buffer size is 10.
Command Mode
Line Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example configures the command history buffer size to 20 commands for the
current terminal session.
console(config-line)#history size 20
line
Use the line command in Global Configuration mode to identify a specific line for
configuration and enter the line configuration command mode.
Syntax
line {console|telnet|ssh}
• console — Console terminal line.
•
telnet — Virtual terminal for remote console access (Telnet).
•
ssh — Virtual terminal for secured remote console access (SSH).
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration mode
User Guidelines
This command has no user guidelines.

Dell PowerConnect 8024 Specifications

General

Switching Capacity	480 Gbps
Stackable	Yes
Device Type	Switch
Enclosure Type	Rack-mountable
Power Redundancy	Optional
Width	17.3 in
Height	1.7 in
Jumbo Frame Support	Yes
Ports	24 x 10 Gigabit SFP+
Management	Web-based GUI, Command Line Interface (CLI), SNMP
VLAN Support	Yes
Power Supply	Internal
Routing Protocol	Static routing
Features	Quality of Service (QoS), VLAN support
Compliant Standards	IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3z
Operating Temperature	0 to 45 °C
Storage Temperature	-20 to 70 °C
Relative Humidity	10% to 90% (non-condensing)
MAC Address Table Size	32, 000 entries