Dell PowerConnect 8024 - Show Interfaces Description

Ethernet Configuration Commands 249
ch1 1213 234 17861 23461
Ch OutOctets OutUcastPkts OutMcastPkts OutBcastPkts
---------------- ---------- ------------ ------------ ------------
ch1 2567 8124 2973 915
Alignment Errors: ............................. 3
FCS Errors: ................................... 8
Single Collision Frames: ...................... 11
Multiple Collision Frames: .................... 90
Late Collisions: .............................. 2
Excessive Collisions: ......................... 10
Oversize Packets: ............................. 45
Internal MAC Rx Errors: ....................... 118
Received Pause Frames: ........................ 270
Transmitted Pause Frames: ..................... 352
Received PFC Frames: .......................... 678
Transmitted PFC Frames: ....................... 390
show interfaces description
Use the show interfaces description command in User EXEC mode to display the description
for all configured interfaces.
Syntax
show interfaces description [ethernet interface | port-channel port-channel-number ]
• interface — Valid Ethernet port.
•
port-channel-number — A valid port-channel index.
Default Configuration
This command has no default configuration.