248 Ethernet Configuration Commands
console#show interfaces counters ethernet 1/xg1
       Ch         InOctets  InUcastPkts InMcastPkts InBcastPkts
---------------- ---------- ----------- ----------- -----------
1/xg1            273        438         164         341
       Ch        OutOctets  OutUcastPkts OutMcastPkts OutBcastPkts
---------------- ---------- ------------ ------------ ------------
1xg1             567       824           193          565
Alignment Errors: ............................. 56
FCS Errors: ................................... 16
Single Collision Frames: ...................... 21
Multiple Collision Frames: .................... 51
Late Collisions: .............................. 7
Excessive Collisions: ......................... 1
Oversize Packets: ............................. 25
Internal MAC Rx Errors: ....................... 318
Received Pause Frames: ........................ 517
Transmitted Pause Frames: ..................... 362
Received PFC Frames: .......................... 117
Transmitted PFC Frames: ....................... 214
Example #4
The following example uses the show interfaces counters command in Privileged EXEC mode 
to display traffic seen by the interface, including Received Priority Flow Control (PFC) Frames 
and Transmitted PFC Frames for the given port channel interface.
console#show interfaces counters port-channel 1
       Ch         InOctets  InUcastPkts InMcastPkts InBcastPkts
---------------- ---------- ----------- ----------- -----------