Ethernet Configuration Commands 247
Ch OutOctets OutUcastPkts
---- ---------- ---------
1 23739 882
Example #2
The following example displays counters for Ethernet port 1/g1.
console#show interfaces counters ethernet 1/g1
Port InOctets InUcastPkts
---- ---------- ---------
1/g1 183892 1289
Port OutOctets OutUcastPkts
---- ---------- ---------
1/g1 9188 9
Alignment Errors: 17
FCS Errors: 8
Single Collision Frames: 0
Multiple Collision Frames: 0
Deferred Transmissions: 0
Late Collisions: 0
Excessive Collisions: 0
Oversize Packets: 0
Internal MAC Rx Errors: 0
Received Pause Frames: 0
Transmitted Pause Frames: 0
Example #3
The following example uses the show interfaces counters command in Privileged EXEC mode
to display traffic seen by the interface, including Received Priority Flow Control (PFC) Frames
and Transmitted PFC Frames for the given ethernet interface.
To Next Page
Loading...
