Dell PowerConnect 8024 - Show Snmp Engineid; Show Snmp Filters

SNMP Commands 1021
Version 3 notifications
Target Address Type Username Security UDP Filter TO Retries
Level Port name Sec
-------------- ----- -------- -------- ---- ------ --- ------
192.122.173.42 Inform Bob Priv 162 filt31 15 3
System Contact: Robert
System Location: Marketing
show snmp engineID
Use the show snmp engineID command in Privileged EXEC mode to display the ID of the local
Simple Network Management Protocol (SNMP) engine.
Syntax
show snmp engineID
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Example
The following example displays the SNMP engine ID.
console# show snmp engineID
Local SNMP engineID: 08009009020C0B099C075878
show snmp filters
Use the show snmp filters command in Privileged EXEC mode to display the configuration of
filters.
Syntax
show snmp filters filtername