Dell PowerConnect 8024 Cli Reference Guide

Web Server Commands 1121
Finger print: DC789788 DC88A988 127897BC BB789788
crypto certificate request
Use the crypto certificate request command in Privileged EXEC mode to generate and display a
certificate request for HTTPS. This command takes you to Crypto Certificate Request mode.
Syntax
crypto certificate number request
• number — Specifies the certificate number. (Range: 1–2)
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
Use this command to export a certificate request to a Certification Authority. The certificate
request is generated in Base64-encoded X.509 format.
Before generating a certificate request, you must first generate a self-signed certificate using the
crypto certificate generate command in Global Configuration mode in order to generate the
keys. Make sure to re-enter values in the certificate fields.
After receiving the certificate from the Certification Authority, use the crypto certificate import
command in Global Configuration mode to import the certificate into the switch. This
certificate replaces the self-signed certificate.

Dell PowerConnect 8024 Specifications

General

Switching Capacity	480 Gbps
Stackable	Yes
Device Type	Switch
Enclosure Type	Rack-mountable
Power Redundancy	Optional
Width	17.3 in
Height	1.7 in
Jumbo Frame Support	Yes
Ports	24 x 10 Gigabit SFP+
Management	Web-based GUI, Command Line Interface (CLI), SNMP
VLAN Support	Yes
Power Supply	Internal
Routing Protocol	Static routing
Features	Quality of Service (QoS), VLAN support
Compliant Standards	IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3z
Operating Temperature	0 to 45 °C
Storage Temperature	-20 to 70 °C
Relative Humidity	10% to 90% (non-condensing)
MAC Address Table Size	32, 000 entries