Dell PowerConnect 8024 - Dhcp L2 Relay Vlan

210 DHCP Layer 2 Relay Commands
Default Configuration
DHCP Option 82 is discarded by default.
Configuration Mode
Interface Configuration (Ethernet).
User Guidelines
There are no user guidelines for this command.
Example
console(config-if-1/g1)#dhcp l2relay trust
dhcp l2relay vlan
Use the dhcp l2relay vlan command to enable the L2 DHCP Relay agent for a set of VLANs. All
DHCP packets which arrive on interfaces in the configured VLAN are subject to L2 Relay
processing. Use the "no" form of this command to disable L2 DHCP Relay for a set of VLANs.
Syntax
dhcp l2relay vlan vlan-range
no dhcp l2relay vlan vlan-range
• vlan-range - The list of VLAN IDs.
Default Configuration
DHCP L2 Relay is disabled on all VLANs by default.
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
console(config)#dhcp l2relay vlan 10,340-345