Dell PowerConnect 8024 - Filedescr

Configuration and Image File Commands 931
Syntax
delete startup-config
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
If the startup-config file is not present when system reboots, it reboots with default settings.
Example
The following example deletes the startup-config file.
console# delete startup-config
Delete startup-config (y/n)?
filedescr
Use the filedescr command in Privileged EXEC mode to add a description to a file. Use the no
version of this command to remove the description from the filename.
Syntax
filedescr {image 1|image2} description
no filedescr {image 1|image2}
• image1|image2 — Image file.
•
description — Block of descriptive text. (Range: 0-128 characters)
Default Configuration
No description is attached to the file.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.