IGMP Commands 597
console(config)#show ip igmp interface membership 224.5.5.5 detail
IGMP INTERFACE DETAILED MEMBERSHIP INFO
Interface Group Compat Source Filter Source Hosts Expiry Time
Mode Mode
---------- ------------- -------------- -------------- -----------
-
show ip igmp interface stats
Use the show ip igmp interface stats command in User EXEC mode to display the IGMP
statistical information for the interface. The statistics are only displayed when the interface is
enabled for IGMP.
Syntax
show ip igmp interface stats vlan
vlan-id
•
vlan-id
— Valid VLAN ID
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC
User Guidelines
This command has no user guidelines.
Examples
The following example displays the IGMP statistical information for VLAN 7.
console#show ip igmp interface stats vlan 7
Querier Status................................. Querier
Querier IP Address............................. 7.7.7.7
Querier Up Time (secs) ........................ 55372
Querier Expiry Time (secs) .................... 0
Wrong Version Queries.......................... 0
To Next Page
Loading...
