Dell PowerConnect 8024 - No Hashing-Mode; Show Interfaces Port-Channel

378 Port Channel Commands
Default Configuration
This command has no default configuration.
Command Mode
Interface Configuration (port-channel)
User Guidelines
No specific guidelines.
Example
console(config)#interface port-channel l
console(config-if-ch1)#hashing-mode 4
no hashing-mode
Use the no hashing-mode command to set the hashing algorithm on Trunk ports to the default
(3).
Syntax Description
no hashing-mode
Default Configuration
This command has no default configuration.
Command Mode
Interface Configuration (port-channel)
User Guidelines
No specific guidelines.
Example
console(config)#interface port-channel 1
console(config-if-ch1)#no hashing mode
show interfaces port-channel
Use the show interfaces port-channel command to show port-channel information.