Dell PowerConnect 8024 - Username

AAA Commands 159
Syntax
show users login-history [long]
• name — name of user. (Range: 1-20 characters)
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Example
The following example show user login history outputs.
console#show users login-history
Login Time Username Protocol Location
-------------------- --------- --------- ---------------
Jan 19 2005 08:23:48 Bob Serial
Jan 19 2005 08:29:29 Robert HTTP 172.16.0.8
Jan 19 2005 08:42:31 John SSH 172.16.0.1
Jan 19 2005 08:49:52 Betty Telnet 172.16.1.7
username
Use the username command in Global Configuration mode to add a new user to the local users
database. To remove a user name use the no form of this command.
Syntax
username name password password [level level ] [encrypted]
no username
name
• name — The name of the user. (Range: 1-20 characters)
•
password — The authentication password for the user. (Range: 8-64 characters. This value can
be 0 [zero] if the no passwords min-length command has been executed.)
•
level — The user level. Level 0 can be assigned by a level 15 user to another user to suspend
that user’s access. (Range: 0-15)