Dell PowerConnect 8024 - Exit

1114 User Interface Commands
Syntax Description
end
Default Configuration
This command has no default configuration.
Command Mode
All command modes
User Guidelines
No specific guidelines.
Example
console(config)#end
console#end
console>
exit
Use the exit command to go to the next lower command prompt.
Syntax
exit
Default Configuration
This command has no default configuration.
Command Mode
All command modes except User EXEC
User Guidelines
There are no user guidelines for this command.
Example
The following example changes the configuration mode from Interface Configuration mode to
User EXEC mode.
console(config-if-1/g1)# exit