Dell PowerConnect 8024 - Ipv6 Dhcp Relay-Agent-Info-Remote-ID-Subopt; Ipv6 Dhcp Server

570 DHCPv6 Commands
ipv6 dhcp relay-agent-info-remote-id-subopt
Use the ipv6 dhcp relay-agent-info-remote-id-subopt command in Global Configuration mode
to configure a number to represent the DHCPv6 the “remote-id” sub-option.
Syntax
ipv6 dhcp relay-agent-info-remote-id-subopt suboption
• suboption — Remote ID suboption. (Range: 1-65535)
Default Configuration
The default value for suboption is 1.
Command Mode
Global Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example configures the number 100 to represent the DHCPv6 the “remote-id”
sub-option.
console(config)#ipv6 dhcp relay-agent-info-remote-id-subopt 100
ipv6 dhcp server
Use the ipv6 dhcp server command in Interface Configuration mode to configure DHCPv6
server functionality on an interface. For a particular interface DHCPv6 server and DHCPv6
relay functions are mutually exclusive.
Syntax
ipv6 dhcp server pool-name [rapid-commit] [preference pref-value ]
• pool-name — The name of the DHCPv6 pool containing stateless and/or prefix delegation
parameters
•
rapid-commit — Is an option that allows for an abbreviated exchange between the client and
server.
•
pref-value — Preference value — used by clients to determine preference between multiple
DHCPv6 servers. (Range: 0-4294967295)