Dell PowerConnect 8024 Cli Reference Guide

Data Center Bridging Commands 201
9
Data Center Bridging Commands
This chapter explains the following commands:
• clear priority-flow-control statistics
•datacenter-bridging
• priority-flow-control mode on
• priority-flow-control priority
• show interfaces datacenter-bridging
clear priority-flow-control statistics
Use the clear priority-flow-control statistics command to clear all or interface Priority-Flow-
Control statistics.
Syntax
clear priority-flow-control statistics [ethernet interface | port-channel port-channel-number ]
• interface — A valid Ethernet port.
•
port-channel-number — A valid port-channel index.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Example #1
console#clear priority-flow-control statistics ethernet 1/xg1
Example #2
console#clear priority-flow-control statistics port-channel 1
Example #3
console#clear priority-flow-control statistics

Dell PowerConnect 8024 Specifications

General

Switching Capacity	480 Gbps
Stackable	Yes
Device Type	Switch
Enclosure Type	Rack-mountable
Power Redundancy	Optional
Width	17.3 in
Height	1.7 in
Jumbo Frame Support	Yes
Ports	24 x 10 Gigabit SFP+
Management	Web-based GUI, Command Line Interface (CLI), SNMP
VLAN Support	Yes
Power Supply	Internal
Routing Protocol	Static routing
Features	Quality of Service (QoS), VLAN support
Compliant Standards	IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3z
Operating Temperature	0 to 45 °C
Storage Temperature	-20 to 70 °C
Relative Humidity	10% to 90% (non-condensing)
MAC Address Table Size	32, 000 entries