Dell PowerConnect 8024 - Show Ip Ospf Abr; Show Ip Ospf Area

OSPF Commands 763
show ip ospf abr
The show ip ospf abr command displays the internal OSPF routing table entries to Area Border
Routers (ABR). This command takes no options.
Syntax
show ip ospf abr
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode.
User Guidelines
There are no user guidelines for this command.
Example
console#show ip ospf abr
Type Router Id Cost Area ID Next Hop Next Hop
Intf
----- --------- ----- --------------- --------- --------
INTRA 3.3.3.3 1 0.0.0.1 10.1.23.3 vlan11
INTRA 4.4.4.4 10 0.0.0.1 10.1.24.4 vlan12
show ip ospf area
Use the show ip ospf area command in Privileged EXEC mode to display information about the
identified OSPF area.
Syntax
show ip ospf area area-id
• area-id — Identifies the OSPF area whose ranges are being displayed. (Range: 0–4294967295)
Default Configuration
This command has no default configuration.