Dell PowerConnect 8024 - Show Radius-Servers

RADIUS Commands 445
show radius-servers
Use the show radius-servers command to display the list of configured RADIUS servers and the
values configured for the global parameters of the RADIUS client.
Syntax
show radius-servers [ accounting | authentication ] [ name [ servername ]]
accounting — This optional parameter will cause accounting servers to be displayed.
authentication — This optional parameter will cause authentication servers to be displayed.
name — This optional parameter will cause the server names to be displayed instead of the
server configuration parameters.
servername — Will cause only the server(s) with server-name name to be displayed. There are
no global parameters displayed when this parameter is specified.
Default Configuration
Authentication servers are displayed by default.
Command Mode
Privileged EXEC mode
User Guidelines
The following fields are displayed:
Field Description
Configured Authentication
Servers
The number of RADIUS Authentication servers that have been
configured.
Configured Accounting Servers The number of RADIUS Accounting servers that have been configured.
Named Authentication Server
Groups
The number of configured named RADIUS server groups.
Named Accounting Server
Groups
The number of configured named RADIUS server groups.
Timeout The configured timeout value, in seconds, for request retransmissions.
Retransmit The configured value of the maximum number of times a request packet
is retransmitted.
Deadtime The length of time an unavailable RADIUS server is skipped.
RADIUS Accounting Mode A Global parameter to indicate whether the accounting mode for all the
servers is enabled or not.