Dell PowerConnect 8024 Cli Reference Guide

724 Multicast Commands
Example
console#show ip pimsm bsr
BSR Address.................................... 1.1.1.1
BSR Priority................................... 20
BSR Hash Mask Length........................... 10
Next bootstrap message(hh:mm:ss)............... 00:00:11
Next Candidate RP advertisement(hh:mm:ss)...... 00:00:00
show ip pimsm interface
The show ip pimsm interface command displays interface config parameters. If no interface is
specified, all interfaces are displayed. This command deprecates the show ip pimsm interface
stats command.
Syntax
show ip pimsm interface [ vlan vlan-id ]
• vlan-id — A valid VLAN ID.
Default Configuration
There is no default configuration for this command.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
console#show ip pimsm interface vlan 3
Slot/Port...................................... vlan 3
IP Address..................................... 1.1.1.1
Subnet Mask.................................... 255.255.255.0
Hello Interval (secs).......................... 30

Dell PowerConnect 8024 Specifications

General

Switching Capacity	480 Gbps
Stackable	Yes
Device Type	Switch
Enclosure Type	Rack-mountable
Power Redundancy	Optional
Width	17.3 in
Height	1.7 in
Jumbo Frame Support	Yes
Ports	24 x 10 Gigabit SFP+
Management	Web-based GUI, Command Line Interface (CLI), SNMP
VLAN Support	Yes
Power Supply	Internal
Routing Protocol	Static routing
Features	Quality of Service (QoS), VLAN support
Compliant Standards	IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3z
Operating Temperature	0 to 45 °C
Storage Temperature	-20 to 70 °C
Relative Humidity	10% to 90% (non-condensing)
MAC Address Table Size	32, 000 entries