Dell PowerConnect 8024 - Match Cos

400 QoS Commands
match cos
Use the match cos command in Class-Map Configuration mode to add to the specified class
definition a match condition for the class of service value (the only tag in a single-tagged packet
or the first or outer 802.1Q tag of a double-VLAN tagged packet).
Syntax
match cos
• cos-value — Specifies the CoS value as an integer (Range: 0–7)
Default Configuration
This command has no default configuration.
Command Mode
Class-Map Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example displays adding a match condition to the specified class.
console(config-classmap)#match cos 1