898 Captive Portal Commands
console#show captive-portal interface 1/g1 client status
Interface................................. 1/g1
Interface Description..................... Unit: 1 Slot: 0 Port: 1 Gigabit
Client Client
MAC Address IP Address CP ID CP Name Protocol Verification
----------------- --------------- ----- ----------------- -------- ------------
0002.BC00.1290 10.254.96.47 1 cp1 http local
0002.BC00.1291 10.254.96.48 2 cp2 http local
Captive Portal Interface Commands
show captive-portal interface configuration status
Use the show captive-portal interface configuration status command to display the interface to
configuration assignments for all captive portal configurations or for a specific configuration.
Syntax
show captive-portal interface configuration [
cp-id
] status
•
cp-id
—Captive Portal ID.
Default Configuration
There is no default configuration for this command.
Command Mode
Privileged EXEC mode.
User Guidelines
There are no user guidelines for this command.
Example
console#show captive-portal interface configuration status
CP ID CP Name Interface Interface Description Type
----- ------------------ --------- ----------------------------------- --------
1 Default 1/g1 Unit: 1 Slot: 0 Port: 1 Gigabit ... Physical
console#show captive-portal interface configuration 1 status
CP ID..................................... 1
To Next Page
Loading...
