Dell PowerConnect 8024 - Show Ip Ospf Interface

OSPF Commands 771
Summary ASBR................................... 0
Type-7 Ext..................................... 0
Opaque Link.................................... 0
Opaque Area.................................... 0
Type-5 Ext..................................... 0
Self-Originated Type-5 Ext..................... 0
Opaque AS...................................... 0
Total.......................................... 0
show ip ospf interface
Use the show ip ospf interface command in Privileged EXEC mode to display the information
for the VLAN or loopback interface.
Syntax
show ip ospf interface {vlan vlan-id | loopback loopback-id }
• vlan-id — Valid VLAN ID.
•
loopback-id — Shows information the specified loopback interface. (Range: 0–7)
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode.
User Guidelines
This command has no user guidelines.