Dell PowerConnect 8024 - Debug Sflow; Debug Spanning-Tree

1006 Serviceability Tracing Packet Commands
Command Mode
Privileged EXEC mode.
Usage Guidelines
There are no usage guidelines for this command.
Example
console#debug rip packet
debug sflow
Use the debug sflow command to enable sFlow debug packet trace. Use the “no” form of this
command to disable sFlow packet tracing.
Syntax
debug sflow packet
no debug sflow packet
Default Configuration
Display of sFlow traces is disabled by default.
Command Mode
Privileged EXEC mode.
Usage Guidelines
There are no usage guidelines for this command.
Example
console#debug sflow packet
debug spanning-tree
Use the debug spanning-tree command to trace spanning tree BPDU packet reception and
transmission. The receive option traces only received spanning tree BPDUs and the transmit
option traces only transmitted BPDUs. When neither keyword is used in the command, all
spanning tree BPDU traces are dumped. Vital information such as source address, destination
address, control packet type, packet length, and the interface on which the packet is received or
transmitted is displayed on the console. Use the “no” form of this command to disable tracing
of spanning tree BPDUs.