802.1X Commands 527
33
802.1X Commands
This chapter explains the following commands:
• dot1x mac-auth-bypass
•dot1x max-req
•dot1x max-users
• dot1x port-control
• dot1x re-authenticate
• dot1x re-authentication
• dot1x system-auth-control
• dot1x timeout quiet-period
• dot1x timeout re-authperiod
• dot1x timeout server-timeout
• dot1x timeout supp-timeout
• dot1x timeout tx-period
•show dot1x
•show dot1x clients
• show dot1x ethernet
•show dot1x statistics
• show dot1x users
802.1X Advanced Features
•dot1x guest-vlan
• dot1x unauth-vlan
• show dot1x advanced
• radius-server attribute 4
dot1x mac-auth-bypass
Use the dot1x mab-enable command to enable MAB on an interface. Use the “no” form of this
command to disable MAB on an interface.
To Next Page
Loading...
