VLAN Commands 505
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Example
The following example displays all VLAN information.
console#show vlan
VLAN Name Ports Type Authorization
-------- --------------- ------ ----- --------------
1 default 1/g1-1/g2 Other Required
2/g1-1/g4
10 VLAN0010 1/g3-1/g4 dynamic Required
11 VLAN0011 1/g1-1/g2 static Required
20 VLAN0020 1/g3-1/g4 static Required
21 VLAN0021 static Required
30 VLAN0030 static Required
31 VLAN0031 static Required
91 VLAN0011 1/g1-1/g2 static Not Required
3964 Guest VLAN 1/g17 Guest -
show vlan association mac
Use the show vlan association mac command in Privileged EXEC mode to display the VLAN
associated with a specific configured MAC address. If no MAC address is specified, the VLAN
associations of all the configured MAC addresses are displayed.
Syntax
show vlan association mac [
mac-address
]
•
mac-address
— Specifies the MAC address to be entered in the list. (Range: Any valid MAC
address)
Default Configuration
This command has no default configuration.
To Next Page
Loading...
