IGMP Commands 587
39
IGMP Commands
This chapter explains the following commands:
•ip igmp
• ip igmp last-member-query-count
• ip igmp last-member-query-interval
• ip igmp query-interval
• ip igmp query-max-response-time
• ip igmp robustness
• ip igmp startup-query-count
• ip igmp startup-query-interval
• ip igmp version
• show ip igmp
• show ip igmp groups
• show ip igmp interface
• show ip igmp interface membership
• show ip igmp interface stats
ip igmp
Use the ip igmp command in Global Configuration mode to set the administrative mode of
IGMP in the system to active.
Syntax
ip igmp
no ip igmp
Default Configuration
Disabled is the default state.
Command Mode
Global Configuration mode
To Next Page
Loading...
