Dell PowerConnect 8024 - Show Captive-Portal Configuration Locales; Show Captive-Portal Configuration Status

906 Captive Portal Commands
show captive-portal configuration locales
Use the show captive-portal configuration locales command to display locales associated with a
specific captive portal configuration.
Syntax
show captive-portal configuration cp-id locales
• cp-id —Captive Portal Configuration ID.
Default Configuration
There is no default configuration for this command.
Command Mode
Privileged EXEC mode.
User Guidelines
There are no user guidelines for this command.
Example
console#show captive-portal configuration 1 locales
Locale Code
---------------
en
show captive-portal configuration status
Use the show captive-portal configuration status command to display information about all
configured captive portal configurations or about a specific captive portal configuration.
Syntax
show captive-portal configuration [ cp-id ] status
• cp-id —Captive Portal ID.
Default Configuration
There is no default configuration for this command.