Dell PowerConnect 8024 - Page 905

Captive Portal Commands 905
• cp-id —Captive Portal ID.
•
interface —Interface in unit/port format.
Default Configuration
There is no default configuration for this command.
Command Mode
Privileged EXEC mode.
User Guidelines
There are no user guidelines for this command.
Example
console#show captive-portal configuration 1 interface
CP ID..................................... 1
CP Name................................... cp1
Operational Block
Interface Interface Description Status Status
--------- ---------------------------------------- ------------ ---------
1/g1 Unit: 1 Slot: 0 Port: 1 Gigabit - Level Disabled Blocked
console#show captive-portal configuration 1 interface 1/g1
CP ID..................................... 1
CP Name................................... cp1
Interface................................. 1/g1
Interface Description..................... Unit: 1 Slot: 0 Port: 1
Gigab...
Operational Status........................ Disabled
Disable Reason............................ Interface Not Attached
Block Status.............................. Not Blocked
Authenticated Users....................... 0