Dell PowerConnect 8024 - Show Classofservice Ip-Dscp-Mapping

418 QoS Commands
11
26
34
43
54
65
76
The following table lists the parameters in the example and gives a description of each.
show classofservice ip-dscp-mapping
Use the show classofservice ip-dscp-mapping command in Privileged EXEC mode to display
the current IP DSCP mapping to internal traffic classes for a specific interface.
Syntax
show classofservice ip-dscp-mapping
• Command is supported only globally.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
Example
console#show classofservice ip-dscp-mapping
IP DSCP Traffic Class
Parameter Description
User Priority The 802.1p user priority value.
Traffic Class The traffic class internal queue identifier to which the user
priority value is mapped.