Dell PowerConnect 8024 - User Name; User Password

902 Captive Portal Commands
user name
Use the user name command to modify the user name for a local captive portal user.
Syntax
user user-id name name
• user-id —User ID (Range: 1–128).
•
name —user name (Range: 1–32 characters).
Default Configuration
There is no name for a user by default.
Command Mode
Captive Portal Configuration mode.
User Guidelines
There are no user guidelines.
Example
console(config-CP)#user 1 name johnsmith
user password
Use the user password command to create a local user or change the password for an existing
user.
Syntax
user user-id password { password | encrypted enc-password }
• user-id —User ID (Range: 1–128).
•
password —User password (Range: 8–64 characters).
•
enc-password —User password in encrypted form.
Default Configuration
There are no users configured by default.
Command Mode
Captive Portal Configuration mode.