IP Addressing Commands 305
Example
The following example displays ARP table information.
console#show arp switch
MAC Address IP Address Interface
------------------- ---------------- ------------
0016.9CE1.D800 10.27.6.1 1/g37
show hosts
Use the show hosts command in User EXEC mode to display the default domain name, a list of
name server hosts, and the static and cached list of host names and addresses. The command
itself shows hosts [hostname].
• Host name. (Range: 1–255 characters)
Default Configuration
This command has no default configuration.
Command Mode
User EXEC mode
User Guidelines
This command has no user guidelines.
Example
The following example displays information about IP hosts.
console>show hosts
Host name:
Default domain: gm.com, sales.gm.com, usa.sales.gm.com
Name/address lookup is enabled
Name servers (Preference order): 176.16.1.18 176.16.1.19
Configured host name-to-address mapping:
Host Addresses
-------------------------- ----------------------------
accounting.gm.com 176.16.8.8
To Next Page
Loading...
