Dell PowerConnect 8024 - Arp Access-List

Dynamic ARP Inspection Commands 223
12
Dynamic ARP Inspection Commands
This chapter explains the following commands:
• arp access-list
• clear counters ip arp inspection
• ip arp inspection filter
• ip arp inspection limit
• ip arp inspection trust
• ip arp inspection validate
• ip arp inspection vlan
• permit ip host mac host
• show arp access-list
• show ip arp inspection ethernet
• show ip arp inspection statistics
• show ip arp inspection vlan
arp access-list
Use the arp access-list command to create an ARP ACL. It will place the user in ARP ACL
Configuration mode. Use the “no” form of this command to delete an ARP ACL.
Syntax
arp access-list acl-name
no arp access-list acl-name
• acl-name — A valid ARP ACL name (Range: 1–31 characters).
Default Configuration
There are no ARP ACLs created by default.
Command Mode
Global Configuration mode