Dell PowerConnect 8024 Cli Reference Guide

1054 Syslog Commands
User Guidelines
This command has no user guidelines.
Example
The following example clears messages from the internal syslog message logging buffer.
console#clear logging
Clear logging buffer [y/n]
clear logging file
Use the clear logging file command in Privileged EXEC mode to clear messages from the
logging file.
Syntax
clear logging file
Default Configuration
There is no default configuration for the command.
Command Mode
Privileged EXEC
User Guidelines
This command has no user guidelines.
Example
The following example shows the clear logging file command and confirmation response.
console#clear logging file
Clear logging file [y/n]
description
Use the description command in Logging mode to describe the syslog server.
Syntax
description description
• description — Sets the description of the syslog server. (Range: 1-64 characters.)

Dell PowerConnect 8024 Specifications

General

Switching Capacity	480 Gbps
Stackable	Yes
Device Type	Switch
Enclosure Type	Rack-mountable
Power Redundancy	Optional
Width	17.3 in
Height	1.7 in
Jumbo Frame Support	Yes
Ports	24 x 10 Gigabit SFP+
Management	Web-based GUI, Command Line Interface (CLI), SNMP
VLAN Support	Yes
Power Supply	Internal
Routing Protocol	Static routing
Features	Quality of Service (QoS), VLAN support
Compliant Standards	IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3z
Operating Temperature	0 to 45 °C
Storage Temperature	-20 to 70 °C
Relative Humidity	10% to 90% (non-condensing)
MAC Address Table Size	32, 000 entries