554 ARP Commands
•
ip-address
— The IP address to be removed from ARP cache.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Example
The following example removes the specified IP address from arp cache.
console#arp purge 192.168.1.10
arp resptime
Use the arp resptime command in Global Configuration mode to configure the ARP request
response timeout. To return the response timeout to the default value, use the no form of this
command.
Syntax
arp resptime
integer
no arp resptime
•
integer
— IP ARP entry response time out. (Range: 1-10 seconds)
Default Configuration
The default value is 1 second.
Command Mode
Global Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example defines a response timeout of 5 seconds.
console(config)#arp resptime 5
To Next Page
Loading...
