Dell PowerConnect 8024 Cli Reference Guide

IP Source Guard Commands 327
Syntax
show ip verify interface
Default Configuration
There is no default configuration for this command.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Example
console#show ip verify interface 1/g1
show ip verify source interface
Use the show ip verify source interface command in Privileged EXEC mode to display the
bindings configured on a particular interface.
Syntax
show ip verify source interface
Default Configuration
There is no default configuration for this command.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Example
console#show ip verify source interface 1/g1
show ip source binding
Use the show ip source binding command in Privileged EXEC mode to display all bindings
(static and dynamic).

Dell PowerConnect 8024 Specifications

General

Switching Capacity	480 Gbps
Stackable	Yes
Device Type	Switch
Enclosure Type	Rack-mountable
Power Redundancy	Optional
Width	17.3 in
Height	1.7 in
Jumbo Frame Support	Yes
Ports	24 x 10 Gigabit SFP+
Management	Web-based GUI, Command Line Interface (CLI), SNMP
VLAN Support	Yes
Power Supply	Internal
Routing Protocol	Static routing
Features	Quality of Service (QoS), VLAN support
Compliant Standards	IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3z
Operating Temperature	0 to 45 °C
Storage Temperature	-20 to 70 °C
Relative Humidity	10% to 90% (non-condensing)
MAC Address Table Size	32, 000 entries