Link Dependency Commands 347
no depends-on ethernet
Use the no depends-on ethernet command to remove the dependent Ethernet ports list.
Syntax
no depends-on ethernet
intf-list
•
intf-list
— List of Ethernet interfaces. Separate nonconsecutive ports with a comma and no
spaces. Use a hyphen to designate the range of ports. (Range: Valid Ethernet interface list or
range)
Default Configuration
This command has no default configuration.
Command Mode
Link Dependency mode
User Guidelines
No specific guidelines
Example
console(config-linkDep-group-1)#no depends-on ethernet 1/g10
depends-on port-channel
Use the depends-on port-channel command to add the dependent port-channels list.
Syntax
depends-on port-channel
port-channel-list
•
port-channel-list
— List of port-channel interfaces. Separate nonconsecutive ports with a
comma and no spaces. Use a hyphen to designate the range of ports. (Range: Valid port-
channel interface list or range)
Default Configuration
This command has no default configuration.
Command Mode
Link Dependency mode
To Next Page
Loading...
