Dell PowerConnect 8024 - Show Ip Igmp-Proxy Interface

602 IGMP Proxy Commands
Version........................................ 3
Number of Multicast Groups..................... 0
Unsolicited Report Interval.................... 1
Querier IP Address on Proxy Interface.......... 0.0.0.0
Older Version 1 Querier Timeout................ 0
Older Version 2 Querier Timeout................ 0
Proxy Start Frequency.......................... 1
show ip igmp-proxy interface
Use the show ip igmp-proxy interface command in Privileged EXEC mode to display a detailed
list of the host interface status parameters. It displays status parameters only when IGMP Proxy
is enabled.
Syntax
show ip igmp-proxy interface
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Example
The following example fails to display status parameters because IGMP Proxy is not enabled.
console#show ip igmp-proxy interface
Interface Index................................ vlan13
Ver Query Rcvd Report Rcvd Report Sent Leave Rcvd Leave Sent
-----------------------------------------------------------------
1 0 0 0 ----- -----
20 0 0 0 0
3 0 0 0 ----- -----