Dell PowerConnect 8024 - Ip Igmp Version; Show Ip Igmp

IGMP Commands 593
console(config)#interface vlan 15
console(config-if-vlan15)#ip igmp startup-query-interval 10
ip igmp version
Use the ip igmp version command in Interface Configuration mode to configure the version of
IGMP for an interface.
Syntax
ip igmp version version
• version — IGMP version. (Range: 1-3)
Default Configuration
The default version is 3.
Command Mode
Interface Configuration (VLAN) mode
User Guidelines
This command has no user guidelines.
Example
The following example configures version 2 of IGMP for VLAN 15.
console#interface vlan 15
console(config-if-vlan15)#ip igmp version 2
show ip igmp
Use the show ip igmp command in Privileged EXEC mode to display system-wide IGMP
information.
Syntax
show ip igmp
Default Configuration
This command has no default configuration.