Dell PowerConnect 8024 - Domain-Name; Ipv6 Dhcp Pool

DHCPv6 Commands 567
domain-name
Use the domain-name command in IPv6 DHCP Pool Configuration mode to set the DNS
domain name which is provided to a DHCPv6 client by the DHCPv6 server. DNS domain name
is configured for stateless server support.
Syntax
domain-name dns-domain-name
no domain-name dns-domain-name
• dns-domain-name — DHCPv6 domain name. (Range: 1–255 characters)
Default Configuration
This command has no default configuration.
Command Mode
IPv6 DHCP Pool Configuration mode
User Guidelines
DHCPv6 pool can have multiple number of domain names with maximum of 8.
Example
The following example sets the DNS domain name "test", which is provided to a DHCPv6 client
by the DHCPv6 server.
console(config)#ipv6 dhcp pool addrpool
console(config-dhcp6s-pool)#domain-name test
console(config-dhcp6s-pool)#no domain-name test
ipv6 dhcp pool
Use the ipv6 dhcp pool command in Global Configuration mode to enter IPv6 DHCP Pool
Configuration mode. DHCPv6 pools are used to specify information for DHCPv6 server to
distribute to DHCPv6 clients. These pools are shared between multiple interfaces over which
DHCPv6 server capabilities are configured.
Syntax
ipv6 dhcp pool pool-name
no ipv6 dhcp pool pool-name
• pool-name — DHCPv6 pool name. (Range: 1-31 characters)