Dell PowerConnect 8024 - Show Lldp Remote-Device

370 LLDP Commands
Extended POE PSE
Available: 0.3 Watts
Source: primary
Priority: critical
Extended POE PD
Required: 0.2 Watts
Source: local
Priority: low
show lldp remote-device
Use the lldp remote-device command in Privileged EXEC mode to display the current LLDP
remote data. This command can display summary information or detail for each interface.
Syntax
show lldp remote-device {detail interface | interface | all}
• detail — Includes detailed version of remote data.
•
interface — Specifies a valid physical interface on the device, unit/port.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Examples
These examples show current LLDP remote data, including a detailed version.
console#show lldp remote-device
Local Remote
Interface Device ID Port ID TTL