Dell PowerConnect 8024 - Clear Config; Copy

926 Configuration and Image File Commands
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
Use the show bootvar command to find out which image is the active image.
Example
The following example loads system image image1 for the next device startup.
console# boot system image1
clear config
Use the clear config command in Privileged EXEC mode to restore the switch to the default
configuration.
Syntax
clear config
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Example
The following example restores the switch to its default configuration.
console#clear config
copy
Use the copy command in Privileged EXEC mode to copy files from a source to a destination.