Dell PowerConnect 8024 - Show Bridge Multicast Address-Table

180 Address Table Commands
• port-channel-number — A valid port-channel number.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Example
In this example, all static entries in the bridge-forwarding database are displayed.
console#show bridge address-table static
Vlan Mac Address Port Type
---- -------------- ----- -----
1 0001.0001.0001 1/g1 Static
show bridge multicast address-table
Use the show bridge multicast address-table command in Privileged EXEC mode to display
Multicast MAC address table information.
Syntax
show bridge multicast address-table [vlan vlan-id ] [address mac-multicast-address | ip-
multicast-address
] [format ip | mac]
• vlan_id — A valid VLAN ID value.
•
mac-multicast-address — A valid MAC Multicast address.
•
ip- multicast-address — A valid IP Multicast address.
•
format — Multicast address format. Can be ip or mac .
Default Configuration
If format is unspecified, the default is mac.
Command Mode
Privileged EXEC mode