656 IPv6 Routing Commands
• ipv6 route distance
• ipv6 unicast-routing
• ping ipv6
• ping ipv6 interface
• show ipv6 brief
• show ipv6 interface
•show ipv6 mld groups
• show ipv6 mld interface
•show ipv6 mld-proxy
• show ipv6 mld-proxy groups
• show ipv6 mld-proxy groups detail
• show ipv6 mld-proxy interface
•show ipv6 mld traffic
• show ipv6 neighbors
•show ipv6 pimdm
• show ipv6 pimdm interface
• show ipv6 pimdm neighbor
•show ipv6 route
• show ipv6 route preferences
• show ipv6 route summary
• show ipv6 traffic
• show ipv6 vlan
• traceroute ipv6
clear ipv6 neighbors
Use the clear ipv6 neighbors command in Privileged EXEC mode to clear all entries in the IPv6
neighbor table or an entry on a specific interface.
Syntax
clear ipv6 neighbors [vlan
vlan-id
]
•
vlan-id
— Valid VLAN ID.
Default Configuration
This command has no default configuration.
To Next Page
Loading...
