IP Addressing Commands 307
show ip interface management
Use the show ip interface management command to display the management interface
configuration.
Syntax
show ip interface management
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following example displays the management interface configuration.
console#show ip interface management
IP Address..................................... 10.27.21.52
Subnet Mask.................................... 255.255.255.0
Default Gateway................................ 10.27.21.1
IPv6 Administrative Mode....................... Enabled
IPv6 Prefix is ................................ FE80::2FF:F2FF:FEA3:7777/64
IPv6 Gateway .................................. none
Burned In MAC Address.......................... 00:FF:F2:A3:77:77
Configured IPv4 Protocol....................... DHCP
Configured IPv6 Protocol....................... None
IPv6 AutoConfig Mode........................... Disabled
Management VLAN ID............................. 1
To Next Page
Loading...
