Dell PowerConnect 8024 Cli Reference Guide

Web Server Commands 1125
Command Mode
Global Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example configures the https port number to 100.
console(config)#ip https port 100
ip https server
Use the ip https server command in Global Configuration mode to enable the switch to be
configured, monitored, or modified securely from a browser. To disable this function, use the no
form of this command.
Syntax
ip https server
no ip https server
Default Configuration
The default for the switch is disabled.
Command Mode
Global Configuration mode
User Guidelines
You must use the crypto certificate generate command to generate the HTTPS certificate.
Example
The following example enables the switch to be configured from a browser.
console(config)#ip https server

Dell PowerConnect 8024 Specifications

General

Switching Capacity	480 Gbps
Stackable	Yes
Device Type	Switch
Enclosure Type	Rack-mountable
Power Redundancy	Optional
Width	17.3 in
Height	1.7 in
Jumbo Frame Support	Yes
Ports	24 x 10 Gigabit SFP+
Management	Web-based GUI, Command Line Interface (CLI), SNMP
VLAN Support	Yes
Power Supply	Internal
Routing Protocol	Static routing
Features	Quality of Service (QoS), VLAN support
Compliant Standards	IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3z
Operating Temperature	0 to 45 °C
Storage Temperature	-20 to 70 °C
Relative Humidity	10% to 90% (non-condensing)
MAC Address Table Size	32, 000 entries