Dell PowerConnect 8024 - Show Ipv6 Brief; Show Ipv6 Interface

678 IPv6 Routing Commands
Example
The following example determines whether another computer is on the network at the IPv6
address specified.
console(config)#ping ipv6 interface loopback 1
FE80::202:BCFF:FE00:3068/128
Send count=3, Receive count=0 from FE80::202:BCFF:FE00:3068/128
Average round trip time = 0.00 ms
show ipv6 brief
Use the show ipv6 brief command in Privileged EXEC mode to display the IPv6 status of
forwarding mode and IPv6 unicast routing mode.
Syntax
show ipv6 brief
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Example
The following example displays the IPv6 status of forwarding mode and IPv6 unicast routing
mode.
console#show ipv6 brief
IPv6 Forwarding Mode........................... Enable
IPv6 Unicast Routing Mode...................... Disable
IPv6 Hop Limit..................................1
show ipv6 interface
Use the show ipv6 interface command in Privileged EXEC mode to show the usability status of
IPv6 interfaces.