DVMRP Commands 579
38
DVMRP Commands
This chapter explains the following commands:
•ip dvmrp
• ip dvmrp metric
• ip dvmrp trapflags
•show ip dvmrp
• show ip dvmrp interface
• show ip dvmrp neighbor
• show ip dvmrp nexthop
• show ip dvmrp prune
• show ip dvmrp route
ip dvmrp
Use the ip dvmrp command to set the administrative mode of DVMRP in the router to active.
IGMP must be enabled before DVMRP can be enabled.
Syntax
ip dvmrp
no ip dvmrp
Default Configuration
Disabled is the default configuration.
Command Mode
Global Configuration
Interface Configuration (VLAN) mode
User Guidelines
This command has no user guidelines.
Example
To Next Page
Loading...
